Betopan

beta pan

Use with Betopan and Betopanplus. The Betopan cement board is a combination of cement, wood and safe chemicals that is widely used in the latest construction technologies. TEPE BETOPAN A.?.

is now part of Bilkent Holding.

Betopan 2,5m (14mm)

Is Cementboard? The Cementboard is a construction panel that combines the beneficial properties of timber and concrete and serves different purposes in different areas of a house by presenting the necessary floor. Cementboard is a resistant moisture resistant material, making it ideal for both indoors and out.

Cementboard panels do not mould due to their resistance to moisture. None of the living or growing creatures, such as e.g. bugs, can survive or thrive in Cementboard shelves. Cement slabs with a 1 cm thick provide the same level of heat insulating properties as cement slabs with a 10 cm thick slab A composite panel installed with cement slabs with a 8 mm thick slab provides the same level of heat insulating properties as a 39 cm thick cavity tile one.

It is the most durable of the other similar material. It is possible to drill, shape, slice and perforate cements. The flexibility of concrete slabs is 4500 N/mm2. In addition to the good characteristics of timber and concrete together, thanks to the mixture of these two basic qualities, the board has other characteristics.

It does not contain any hazardous substances such as phormaldic acids and assbestos. It is resistant to biological-chemical substances and waste such as heating oils. From an economical and technical point of view, the GALVANIZED M PROFILE SYSTEM FOR Cementboard BOARD was to be used as the substructure.

  • the normal aluminium and PVC profile can be used or the potting compound can be kept open on the sides of the panels after the clear coat has been applied. The best benefit of Cementboard is its workability with the moulds used for artificial resins (plywood). It was found after experimentation that the saw blade was less damage in Cementboard than in the case of veneer, as there is no accumulation of thread materials and less thermal energy is generated by the lower frictional forces.

Cementboard' s metalworking tooling should be chosen in its commercial application to provide an economical tool. Cement slabs should always be coloured indoors in a sealed area. In order to achieve a homogenous finish and an even colour uniformity, both sides of the cement board should be coloured without a break with the same kind of colours, whose concentrations are also the same.

NOTICE: Our firm does not allow any dyestuff producer to manufacture dyestuffs and auxiliaries under the Cementboard name or similar and indeed does not advise the use of such dyestuffs marketed. In order to lower the costs, some applicator use color only for one side of Cementboard, without observing the surcharges.

b ) Colouring of cement boards in outdoor areas When colouring cement boards in outdoor areas, the first colouring should take place in a sealed area before laying and priming.

In order to prevent Cementboard from deforming (concave or convex), both surface of the panel should be coated without a break, provided that the DIFFUSION STRENGTH is the same. alkalli resistant paints and primers for outdoor or damp areas should be used.

It should withstand changing climatic influences and minimize breathing (vapour permeability). In addition, the directions of the chosen color should be strictly followed during use. Tapes, tasonite plates and their equipment should also be coloured as described above. We recommend the use of SILICON-BASED Pains for spacecraft partitioning in such missions.

NOTICE: Our firm does not allow any dyestuff producer to manufacture dyestuffs and auxiliaries under the Cementboard name or similar and indeed does not advise the use of such dyestuffs marketed. In order to lower the costs, some applicator use color only for one side of Cementboard, without observing the surcharges.

Cement slabs are deposited on cement board stencils inland and on wood slabs abroad, which are periodically placed under coverings of polyamide. The spacing between the stencils in the piles should not be smaller than 80 cm. Shelves should be horizontal on the pattern and not perpendicular to a panel or area.

Stencils should be on the same line when the piles of planks are on top of each other. The piles should be wrapped with a baled sheet during transport. Cement slabs are conveyed within the territory on Cementboard stencils, the sides being coloured and labelled as' Tepe Concrete', coated with polyamide and encircled by a ring of clips, they are conveyed abroad on wood slabs, the sides being coloured, completely coated with polyamide and encircled by a ring of clips.

  • The Cementboard piles should be placed on the patterns, which are placed in an intermittent (max. 80cm) to avoid declension. - The stencils should be on the same line when the piles of planks are on top of each other. - Cement slabs should be absolutely kept in a locked room.
  • Cement slabs, both in the warehouse and at the point of use, should be horizontal on the stencils and not inclined perpendicular to a walls or surfaces. - The Cementboard piles should be placed on the stencils, which are placed in an intermittent (max. 80cm) to avoid declension.
  • The stencils should be on the same line when the piles of planks are on top of each other. - If the Cementboard piles remain in storage for a long period of storage, they should be coated with a layer of polyamide to prevent fluctuations in moisture and temperatures (to make them decisive).
  • If the pile is opened to accommodate and use the planks, the rest should be sealed with a shroud of as before. - In cases where the panels are to be worn individually, it is advisable to wear them in a horizontal or horizontal plane to prevent the panels from deforming.

Mehr zum Thema